TR-800 Quick Start Card
Initial Beltpack and Base Station Set-up
1.
Press [MENU] as powering-up the base station. This will place it on group 01A and set
the receives on channels: 01, 02 , 03 and 04. Ensure the appropriate portable station
connect path is enabled. If used stand alone, the base should be in the 4-wire mode.
2.
Set beltpack back panel slide switch to push-to-talk (PT TALK).
3.
Press [MENU] as powering-up the beltpack. This will place the beltpack on group
01A with channel 01 flashing.
4.
Use the [UP] and [DOWN] arrow buttons to change the channel to an unoccupied receive
channel on the base station. Then press [SET]. Press [MENU] if not changing channels.
5.
The group/channel on the beltpack should now match the group and a receive channel
on the base station. Nothing should be flashing on the beltpack screen.
6.
Plug a headset into the beltpack and set the microphone gain so the BAT/OM light
flashes at the beginning of most words at normal speech levels.
Special Functions
ClearScan
· · · · · · · Press [MENU]+[SET] buttons for 3 seconds. After 25 seconds of
searching, the beltpack will produce a list of the groups organized
from best (clearest) to worse. The best group is displayed
flashing. Use the [UP] and [DOWN] buttons to select other
groups if desired.
Lockout
· · · · · · · · Press [UP]+[DOWN] arrows buttons for 3 seconds. Repeat to
toggle it off/on.
1
st
Use Default
· · · Press [MENU] as powering-up the beltpack. Sets beltpack on
group 01A with channel 01 flashing. User must then set the
channel. All user-programmed memory is retained.
Factory Default
· · Press [MENU]+[SET]+[UP]+[DOWN] buttons for 3 seconds to
software “reset” the beltpack. All user-programmed memory is erased.
Feature Enable/Disable
Stage Announce (SA)
. . . . . . . . . Pressandhold[SET]then press[SA]totoggle on/off.
Wireless Talk Around (WTA)
. Press and hold [SET] then press [WTA] to toggle
between “On latching”, “On non-latching” and Off.
Audio Channel A/B
. . . . . . . . . . Press and hold [SET] then press [CHAN] to cycle
among A only, B only, both.
Talk Button
. . . . . . . . . . . . . . . . Press and hold [SET] then press [TALK] to enable
latching or non-latching.
1. [MENU] and [SET] buttons
– Used to select menus and set options on the LCD.
2. LCD display
.
3. [UP] and [DOWN] buttons
– Used to select beltpack options on the LCD.
4. Microphone Gain
– Adjusts the headset’s microphone gain. Adjust so that the light
flashes at the beginning of most words at normal speech levels.
5. Push-to-Talk/Push-to-Transmit Switch
–
Push-to-Talk (PT TALK)
– The transmitter is always on. No audio sent
unless the talk switch, WTA or SA button pressed. Recommended position.
Push-to-Transmit (PT TX)
- The transmitter and audio path are off except
when the talk switch, WTA or SA button is pressed.
6. Headset Connector
– Male XLR connector for Telex units, Female XLR connector
for RTS units.
7. Battery Latch
– Press down to enable the battery pack to be released. While the latch
is held down, slide the battery pack about 1/8 inch back, toward the latch, until it stops,
then lift out.
8. Receive Antenna
– Screw type ¼ wave replaceable antenna. The receiver antenna is
always the longer antenna. Color dot on the screw end of the antenna must match color
dot on antenna receptacle.
9. Transmit Antenna
– Screw type ¼ wave replaceable antenna. Color dot on the screw
end of the antenna must match color dot on antenna receptacle.
MENU
SET
MIC
PT
TX
PT
TALK
6
7
8
9
MENU
SET
MIC
PT
TX
PT
TALK
2
1
3
4
5
TR-800 Quick Start Card
Initial Beltpack and Base Station Set-up
1.
Press [MENU] as powering-up the base station. This will place it on group 01A and set
the receives on channels: 01, 02 , 03 and 04. Ensure the appropriate portable station
connect path is enabled. If used stand alone, the base should be in the 4-wire mode.
2.
Set beltpack back panel slide switch to push-to-talk (PT TALK).
3.
Press [MENU] as powering-up the beltpack. This will place the beltpack on group
01A with channel 01 flashing.
4.
Use the [UP] and [DOWN] arrow buttons to change the channel to an unoccupied receive
channel on the base station. Then press [SET]. Press [MENU] if not changing channels.
5.
The group/channel on the beltpack should now match the group and a receive channel
on the base station. Nothing should be flashing on the beltpack screen.
6.
Plug a headset into the beltpack and set the microphone gain so the BAT/OM light
flashes at the beginning of most words at normal speech levels.
Special Functions
ClearScan
· · · · · · · Press [MENU]+[SET] buttons for 3 seconds. After 25 seconds of
searching, the beltpack will produce a list of the groups organized
from best (clearest) to worse. The best group is displayed
flashing. Use the [UP] and [DOWN] buttons to select other
groups if desired.
Lockout
· · · · · · · · Press [UP]+[DOWN] arrows buttons for 3 seconds. Repeat to
toggle it off/on.
1
st
Use Default
· · · Press [MENU] as powering-up the beltpack. Sets beltpack on
group 01A with channel 01 flashing. User must then set the
channel. All user-programmed memory is retained.
Factory Default
· · Press [MENU]+[SET]+[UP]+[DOWN] buttons for 3 seconds to
software “reset” the beltpack. All user-programmed memory is erased.
Feature Enable/Disable
Stage Announce (SA)
. . . . . . . . . Pressandhold[SET]then press[SA]to toggle on/off.
Wireless Talk Around (WTA)
. Press and hold [SET] then press [WTA] to toggle
between “On latching”, “On non-latching” and Off.
Audio Channel A/B
. . . . . . . . . . Press and hold [SET] then press [CHAN] to cycle
among A only, B only, both.
Talk Button
. . . . . . . . . . . . . . . . Press and hold [SET] then press [TALK] to enable
latching or non-latching.
1. [MENU] and [SET] buttons
– Used to select menus and set options on the LCD.
2. LCD display
.
3. [UP] and [DOWN] buttons
– Used to select beltpack options on the LCD.
4. Microphone Gain
– Adjusts the headset’s microphone gain. Adjust so that the light
flashes at the beginning of most words at normal speech levels.
5. Push-to-Talk/Push-to-Transmit Switch
–
Push-to-Talk (PT TALK)
– The transmitter is always on. No audio sent
unless the talk switch, WTA or SA button pressed. Recommended position.
Push-to-Transmit (PT TX)
- The transmitter and audio path are off except
when the talk switch, WTA or SA button is pressed.
6. Headset Connector
– Male XLR connector for Telex units, Female XLR connector
for RTS units.
7. Battery Latch
– Press down to enable the battery pack to be released. While the latch
is held down, slide the battery pack about 1/8 inch back, toward the latch, until it stops,
then lift out.
8. Receive Antenna
– Screw type ¼ wave replaceable antenna. The receiver antenna is
always the longer antenna. Color dot on the screw end of the antenna must match color
dot on antenna receptacle.
9. Transmit Antenna
– Screw type ¼ wave replaceable antenna. Color dot on the screw
end of the antenna must match color dot on antenna receptacle.
MENU
SET
MIC
PT
TX
PT
TALK
6
7
8
9
MENU
SET
MIC
PT
TX
PT
TALK
2
1
3
4
5
