Telex IP-223, Техническое руководство

Страница: 109 / 136

111
Pass Change Window
Pass Change Window
The Account Password Change window is used to assign a password, see “Accessing IP-223 Web Browser Configuration
Windows” on page 39.
NAVIGATION: Clicking Pass Change displays the Account Password Change window shown in Figure 132.
Enter the desired four-digit number in the provided fields. If the two (2) PINs entered are the same, the password number is
entered into memory. The password is required to be entered in the Password field on the Connect to [IP Address] window to
access the web setup windows for the IP-223.
NOTE: The password entered does not take effect until the IP-223 has been reset.
To define a password for the administrator’s user name , do the following:
NOTE: Make note of the new password before adding or changing a password number.
1.
From the links, select Pass Change .
The administrator’s Account Password Change window appears .
2.
In the New Password field, enter a four digit password number .
3.
In the Confirm Password field, enter the four digit password number assigned in the previous step.
4.
Click Submit .
The entries currently displayed on the window are sent to the IP-223 for storage.
5.
From the links, select Save to EEPROM .
The Save Setup Parameters window appears .
6.
Click Save Parameters .
The entries are saved to permanent memory.
7.
Click Reset IP-223.
A momentary loss of connectivity occurs and the window shown in Figure 120 appears. The connection is restored in
several seconds.
FIGURE 132.
Account Password Change