Telex IP-223 Скачать руководство пользователя страница 102

Страница: 102 / 136

Setup Information

104

Patch Timeout Field

The

Patch Timeout

field identifies the amount of time, in seconds, allowed for inactivity on an active patch. If a patch is

inactive for the specified period of time, the patch is dropped.

The range for this field is

999seconds

NOTE:

Patch Timeout must be greater than Global Timeout.

Global Field

The

Global

field identifies the amount of time, in seconds, allowed for any patch.

The range for this field is

32000seconds

Drop All Field

The

Drop All

field identifies the DTMF digit sequence used to drop all current patches. The number entered must be the

number of digits specified in the Dialing Digits field.

The range for this field is

9999seconds

RCP Tables

The required fields depend on the mode selected:

XPATCH - requires #1 or #2, IP Address, Add String and Delete String

DIAL - requires Phone, Add String and Delete String

DLVOIP - requires Rx Multicast/Port, Tx Multicast/Port, Add String and Delete String

PHONEP - requires Add String and Delete String

LPTCH - requires Add String and Delete String

Jump To Entry Drop Down Menu and Go Button

The

Jump To Entry

drop down menu allows you to select (in groups of (10)) function tones to view and modify.

From the Jump To drop down menu, select the

entries

you want to view.

Click the

button.

The function tones you select appears.

Entry Field

The

Entry

field labels the row for the crosspatch entry.

Add String Field

The

Add String

field identifies the DTMF digit sequence to add this crosspatch entry. The number entered must be the

number of digits specified in the Dialing Digits field.

This field can contain up to

4 digits

RCP Tables

Содержание IP-223









































































































































Результаты поиска

Содержание IP-223

Отзывы:

Похожие инструкции для IP-223

Бренды по названию

Популярные бренды

Telex IP-223, Техническое руководство

Результаты поиска

Содержание IP-223

Отзывы:

Похожие инструкции для IP-223

Бренды по названию

Популярные бренды