Squelch Control: This control allows the user to squelch (reject)
minor noise or interference that might exist on a channel in your area.
CAUTION
This control is factory set for average conditions. If the
control is fully advanced, short range or excessive
drop-outs can occur.
Headphone “PHONES” Level Control: This control allows the user
to adjust the volume or output level of the monitoring headset audio.
The control is factory set for typical headset output level.
CAUTION
If the ENG-1 Receiver is powered by external batteries
that are also common with other auxilliary equipment,
connecting the phones jack to the auxilliary jack can
cause damage to the ENG-1 Receiver.
Headphone “PHONES” Jack: 3.5mm O.D. Male, Mono Jack.
NOTE
Telex reccommends that a 32 to 600 ohm headset be
used.
Low Battery Indicator: A yellow LED flashes when power is applied
to indicate a good battery. Lights when the battery is low.
TX ON Indicator: A green LED displays when the ENG-1 is
receiving a transmitted signal.
-6-
