Telex Audiocom US-2002, Инструкция пользователя

Страница: 18 / 38

16
The configuration, shown in Figure 5, is suitable for smaller intercom systems when you want to operate the US-2002 as a
master speaker station, with a separate speaker for each intercom channel. Make sure the US-2002 internal dip switches are set
for binaural speaker operation as described on page 10. Also, set the SPS2001 Combine/Isolate switch to the Isolate position.
With this setting, the two (2) intercom channels are completely separated. The amplified speaker in the SPS2001 is used as the
speaker output for channel 1, and the SPK2000 is used for channel 2. The PA-KP local power supply is optional. When a PA-
KP is connected, the US-2002 automatically disconnects from system power supplied by the SPS2001. Since the US-2002 is
not drawing power from the intercom system, more system power is available for additional belt packs, etc.
NOTE: For more information about cables, see Figure 15 on page 26.
NOTE: A BOP-1000 may be used to rack mount 2 TW-7W splitters.
FIGURE 5.
US-2002 Binaural Master Speaker Station Configuration with 1 Power Supply.