Telewave.io 44DL Quick Start Guide
Copyright © Telewave.io
Page
1
of
2
Specifications subject to change without notice
www.telewave.com
1-408-929-4400
220819
Quick Start Guide
The complete 44DL User Manual is available for download at
www.telewave.com
.
1.
Unpack the 44DL and accessories (USB cable, AC power supply, & AC adapter kit)
2.
Check the box and contents for any damage immediately after it arrives
3.
In case of damage or missing items, contact Telewave immediately, 408-929-4400 Opt 1.
4.
Charge the Batteries
•
Connect the supplied USB cable into the 44DL (connector on the back) and into the
supplied AC power supply. Plug the power supply into a 90 to 250 VAC (50 or 60 Hz)
wall socket (Charging begins automatically – there is no charging indication when the
44DLis off)
•
The 44DLmust be charged for at least 2 hours before turning on for first use.
•
The 44DLcannot be switched ON or OFF while charging via the USB. Disconnect the USB
cable, toggle the power button, and then re-connect the USB to continue charging.
•
See the section “
Lithium Battery Management
” for battery management details
5.
Build or procure “Primary Cables” (see “Appendix - Connecting the 44DLto the Circuit”)
6.
Press and hold the power button until the blue power indication in the switch illuminates
7.
The 44DLwill be functional in three to five seconds as indicated by:
•
Backlight will be illuminated
•
Frequency, battery indicators are displayed
8.
The HOME screen & menu tree:
•
Freq Range > Set operating frequency range*
•
Modulation > Selects the modulation type*
•
Settings > Modify some look & feel parameters
•
Info & Help > Show Version, Telewave contact
*Set the Frequency Range and Modulation before use or
measurement will be inaccurate, other settings are optional
When in any MENU screen other than the HOME Screen, the
function buttons will be UP, SELECT/EXIT, and DOWN.
Press SELECT implements the selection & returns HOME
9.
Once the 44DL has been configured, the cables can be connected
10.
Connect the primary cable to the port labeled TX on the left side of the 44DL(RF input)
11.
Connect the cable leading to the antenna to the port on the right side of the 44DL(RF output)
12.
The RF Sample port can be connected to any monitor or source test equipment. The sample
port is bi-directional, with connectivity to both the Thru Line TX and Thru Line ANT port.
Wiring Diagram
Original Circuit
½ WL Increment
Insert test cables
44DL
& 44DL at the
TX ANT
Component output
Primary Cable (1/2 WL increment minus 3”)
Secondary Cable (Optional = ½ WL incr. - 3”)