Teletrac CTO7, Руководство по установке

Страница: 14 / 20

Mack CH Series- CTO and FIL Location
The CTO7 is installed on the blank panel of
the center dash, as shown at top right, above
the CB radio power connection point. The FIL
is installed in the same panel, to the left of
the CTO7, centered between and slightly to
the right of the air switches. A small relief
notch is required to be filed into the dash
panel to allow passage of the CTO7 data
cable, as shown at bottom right. Please
ensure that adequate cable slack is provided
so that the driver may adjust the CTO7 as
needed.
Note: Please refer to the CTO7 mounting and
provisioning instructions for direction as to
how to mount and test the device’s
functionality. The CTO7 must be fully tested
prior to calling for verification.