Teletrac CTO7, Руководство по установке

Страница: 10 / 20

Sterling LT Series- CTO and FIL Location
The CTO7 is installed on the blank panel of
the center dash, as shown at top right. The
FIL is installed in the smaller blank panel
below the CTO7, to the left of the bank of
switches. A small relief notch is required to
be filed into the dash panel to allow passage
of the CTO7 data cable, as shown at bottom
right. Please ensure that adequate cable slack
is provided so that the driver may adjust the
CTO7 as needed.
Note: Please refer to the CTO7 mounting and
provisioning instructions for direction as to
how to mount and test the device’s
functionality. The CTO7 must be fully tested
prior to calling for verification.