Voice Guide Keypad - LED63VG User Manual
7
LED Indication
arms the system (
See page
8
)
bypasses certain zone(s)
(
See pages 12, 20)
reviews system troubles
(
See page 12)
reviews event memory
(
See page 13)
activates programming
mode (
See pages 11, 16
)
disarms the system (
See
page 10
)
ARM
DISARM
BPS
TRBL
MEM
PRG
clears entered data or
transfers to previous
menu level
confirms entered data or
transfers to next menu
level
scroll event memory (
See
pages 13, 19)
CLR
ENT
Keypad
LED Light
Blinking
RDY (green) System ready
Programming mode
ARM (red)
System armed
Exit time / Programming mode
TRBL (red)
-
Technical problem / Programming
mode
BPS (red)
Bypassed zones
-
TAMP (red)
Tamper memory Tamper
MEM (red)
Alarm memory
Activated fire detector
1 - 6 (red)
Alarm memory
Activated zone detector
Voice Guide Keypad - LED63VG User Manual
18
Now the manager can switch over
between code change mode and
user permissions mode, using the
and
keys.
Originally the system is in code
change mode. LEDs 3, 4, 5 and 6
light up to indicate the number of
code digits left to be entered.
The manager is expected to enter
the new user code.
Entering new user code key
sequence:
NEW
CODE
(4 digits)
(2
beeps)
NEW
CODE
(reenter)
The new code is accepted and the
system automatically enters user
permissions mode.
The LEDs indicate the respective
operations the user is allowed to
execute. The lit numbers indicate
the permitted programs.
Disarm
Full arm
Bypass
Force arm
Review
event memory
Stay arm
Pressing a numeric key
alternatingly switches over the
state of the respective operation
from forbidden to permitted.
Selection is confirmed by pressing
the
ENT
key.
User permissions key sequence:
ENT
3
3
3
