Teletek electronics iRIS8, Инженерное программирование Руководство

Страница: 85 / 87

iRIS8 - Addressable Fire Alarm Panel
– Installer Programming
85
APPENDIX G - Messages for Events
Note: The messages are followed from a Panel, Zone and Loop number, and also Device address, when the event is
received from another panel in the network.
Message Description
Flash Error FLASH Memory error is detected.
Ram Error RAM Memory error is detected.
New Periphery Devices Found New periphery devices are found in the system configuration.
Periphery Device Fault The device is not responding (the device is lost or failed).
Periphery Device Type Error A periphery device with different type is found on the address.
AC Loss The main power supply is lost.
Battery Low The accumulator battery is discharged.
Battery Loss The accumulator battery is missing.
Battery High Resistance
High value (
Ri>0.3Ω) of the battery internal resistance. Replace the battery
immediately!
Earth Fault Resistive connection between some signals and earth < 10k.
Charger Fault The charging unit is failed.
Sounder1 Short Short circuit detected at Sounder 1 output.
Sounder2 Short Short circuit detected at Sounder 2 output.
Sounder1 Open Circuit broken at Sounder 1 output.
Sounder2 Open Circuit broken at Sounder 2 output.
Fire Output Short Short circuit detected at Fire output.
Fire Output Fault Circuit broken at Fire output.
EXT Output Short Short circuit detected at Extinguishing output.
EXT Output Fault Circuit broken at Extinguishing output.
Fault Output Short Short circuit detected at Fault output.
Fault Output Fault Circuit broken at Fault output.
Fault Power AUX Short circuit (the mains power supply is lost).
Alarm Confirm Input Short Short circuit detected at input
“Alarm Confirmation”.
Alarm Confirm Input Open Circuit broken at input
“Alarm Confirmation”.
Alarm Confirm Input On
“Alarm Confirmation” input activation.
Protection Alarm Confirm Short Short circuit detected at input
“Protection Alarm Confirmation”.
Protection Alarm Confirm Open Circuit broken at input
“Protection Alarm Confirmation”.
Protection Alarm Confirm On
“Protection Alarm Confirmation” input activation.
Fault Protection Panel Input Short Short circuit detected at input
“Protection Panel Fault”.
Fault Protection Panel Input Open Circuit broken at input
“Protection Panel Fault”.
Fault Protection Panel Input On
“Protection Panel Fault” input activation.
Protection Panel Fault The extinguishing panel failure.
Loop Break The loop is broken.
Loop Short Short circuit detected in the loop.
New Loop Devices Found New loop devices are found in system configuration (Loop 1 or Loop 2).
Loop Zero Address There is a device without address number (a device with address 0 is applied).
Double Panel number
Doubling of the panel number (when two or more panels are connected in a
network).
Panel Fault
Fault in the connection with another panel (when two or more panels are
connected
in a network).
Reset Resetting of the panel.
Silence Alarm The sounders have been silenced.
Zone Disabled The zone is disabled.