PRISM MPI2-10 and MPX2-10 Field Upgrade Kit Instructions
13
8.
Use the 11/32 inch socket nut driver to loosen the two lock nuts on the side
of the Mixed Media board module.
Figure 14:
Loosen the lock nuts securing the Mixed Media board module to the
instrument
9.
Slide the Mixed Media board and carrier frame away from the PCIe and
power connector on the Slot Host board.
10.
Use a TORX-driver with a T-10 TORX tip to remove the four screws on
the corners of the Mixed Media board.
Figure 15:
Remove the Mixed Media board screws
Содержание MPI2-10-UP PHY
Страница 12: ......
