Telestream lightspeed live capture, Руководство пользователя

Страница: 89 / 350

Configuring the Lightspeed Live Capture Server and Apps
Renaming or Reconfiguring Servers
89
Lightspeed Live Capture User Guide
2. Verify that you have configured the other (non-Lightspeed) Vantage domain server
with Array, and it is active. Refer to the
Vantage Domain Management Guide >
Installing a Vantage Distributed Domain , for more details.
3. Verify that the Lightspeed Live Capture server is on the same network as the
existing Vantage Array domain, with sufficient network permissions and access.
Refer to the
Vantage Domain Management Guide > Network Requirements , to
configure your network.
4. Start the Vantage Management Console, and select the new Vantage Array domain.
5. Add the services on the Lightspeed Live Capture server to the new Vantage Array
domain, just as you would do with any Vantage Services running on any Vantage
server.
6. Apply the appropriate multiple-server Vantage license onto the system running the
master domain database. See the
Vantage Domain Management Guide for details
on licensing.
Also see, Important Notes on Configuring Non-Capture Workflow Actions on Multiple
Server Systems .
Uniquely Named Multiple Capture Servers
To ensure each capture source has a unique name when multiple Live Capture servers
are part of a multi-server Capture-only system, or part of an existing Vantage array, you
will need to change the default source names to make them unique and identifiable.
Source names default to “SDI Input [1 through n]”, where ‘n’ is 4 or 8 depending on
which Lightspeed Live server you have.
For example, by default, Source names for a 4 channel Live Capture server will be:
SDI Input 1, SDI Input 2, SDI Input 3, and SDI Input 4
If you change source names by using the Source Manager, keep in mind that all sources
in an array must be uniquely named so you can easily distinguish sources on one server
from another.