Telestream lightspeed live capture Скачать руководство пользователя

Страница: 238 / 350

Appendix B: Containers, Codecs, and Vantage Actions

QuickTime 'Open' Output

238

Lightspeed Live Capture User Guide

Note:

The Clean Aperture selection should not be used in conjunction with the

Enable CLAP Atom selection. Only one or the other should be used.

Enable CLAP atom

. Enables the QuickTime Clean Aperture atom.

Note:

CLAP Atom insertion should not be used in conjunction with Conform

Aperture > Clean Aperture selection above. Only one or the other should be used.

Aspect Ratio Mode

. Specifies how to set the display or pixel aspect ratio of the output.

- Automatic

- Set the aspect ratio setting automatically, based on detected content.

- Display Aspect Ratio

- Specifies 4:3 | 16:9.

- Pixel Aspect Ratio

- Specifies the selected pixel aspect ratio.

Clean Aperture

Specify the crop settings for Left, Right, Top, and Bottom pixels to apply to the Clean
Aperture. Options include:

Not Enabled

- Turns off the crop settings for Clean Aperture.

- Specify Inset

- Enables the ability to specify the Clean Aperture crop settings.

Video Stream Details

Select the Video Stream component to display its options on the right.

Codec

. Specifies which codec to use to encode video streams. For details, see the

appropriate topic following.

Apple ProRes

Quality

. Specifies video quality profile: 422 HQ | 422 SQ | 422 LT | 422 Proxy | 444.

Avid DNxHD

Quality

. Specifies video quality profile: 444 | HQX (10 bit, 220/185 Mbps) | HQ (220/185

Mbps) | SQ (145/120 Mbps) | SQ TR (100 Mbps) | LB (45/36 Mbps).

Quality

- 444

- HQX (10 bit, 220/185 Mbps)

Содержание lightspeed live capture































































































































































































































































































































































Результаты поиска

Содержание lightspeed live capture

Отзывы:

Похожие инструкции для lightspeed live capture

Бренды по названию

Популярные бренды

Telestream lightspeed live capture, Руководство пользователя

Результаты поиска

Содержание lightspeed live capture

Отзывы:

Похожие инструкции для lightspeed live capture

Бренды по названию

Популярные бренды