
Installation
Card
Code:1850868
Made by
Educational
Made by
Educational
The Divace Solo Headset Adapter
Installation Step by Step
1.
4.
Install the Divace Solo software according to the Divace User Manual.
Install the Divace Solo software
Install Divace Headset Adapter
2.
3.
Connect the Headset Adapter cable to sound card and configure jumpers inside
the Headset Adapter, see the paragraph “Divace Headset Adapter Installation”.
The Divace Solo computer sound card mixer should be preadjusted to achieve
best audio performance, see the paragraph "Computer sound card mixer
adjustment".
Instead of adjusting every sound card individually, you can copy both CFG files
into other student computers’ Divace Solo installation directories,
.
Connect Headset Adapter cable to sound card
Adjust computer sound card mixers
if all sound
cards are of the same type
At the end of the adjustment procedure the sound card setting file DIVACE.CFG
and map file mixer_name.CFG are created and saved on the Divace Solo
installation directory.
If more than one Divace Solos are installed at time, do the following:
Connect headset(s) to Headset Adapter. See the paragraph "Divace Duo
Headset Adapter Installation".
Install Headset Adapters to student furniture. See the paragraph "Three ways to
install Headset Adapter".
Diva
e Solo
c
Digital Interactive
Audio Video
Recorder
Three Ways to Install Headset Adapter
1. Leave it on the table top beside computer.
2. Install it with screws under the table top.
3. Install it with the Desk Top Housing (accessory).
1.
2.
3.
LAB
Stand Alone
J11
J5
1
1-2 = 3 mV
2-3 = 30 mV
OFF = 200 mV
Divace Headset Adapter
Installation
Headset Installation
The Headset Adapter has four headset sockets:
two in front and two inside the Headset Adapter.
To install headset(s) inside the Headset Adapter
you have to cut a hole in the plastic cover for
headset cable(s) to pass through.
Headset Installation on Rear Panel
Open the plastic cover by removing the two
screws on the bottom.
Attach headsets to connectors inside the
Headset Panel.
Cut a hole in the thin plastic cover for headset
cable(s) to pass through.