TeleSite QuickSilver DV202S, Руководство по установке и эксплуатации

Страница: 9 / 42

TX001-00-00 Rev 101 QuickSilver DV202S Video Transmitter Introduction
••••
1
Introduction
The information in this manual covers the installation, configuration and operation of the TeleSite USA
QuickSilver Global Video Transmission System. This system should only be installed by a qualified technician
using common hand tools and approved materials in accordance with national, state and local wiring codes.
How to Use this Manual
This manual was designed to provide the best overall instructions for the installation and operation of the
Telesite USA QuickSilver Global Video Transmission System. The graphics and terminology used in this
manual have been carefully selected to enable a clear and distinct understanding of QuickSilver and its
components. This manual has been formatted to present distinct methods of installation for experienced and
novice installers.
For experienced installers:
Start at the Quick Installation sub-section of the Installation section to use the simplest steps for proficient
installers. Follow the references provided in the text for items such as wiring tables and DIP Switch settings.
Refer to the subsequent sections of Installation, Configuration and Operation for detailed descriptions of any
method.
For novice installers:
Complete the remainder of this section (Introduction) and proceed to the Detailed Installation sub-section of
the Installation section to use the most explicit steps for beginning installers. When complete, proceed to the
Configuration and Operation sections to continue the total installation.
Unpacking and Inspection
All Telesite USA equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility
to provide suitable delivery. Inspect the cartons upon delivery and, if damage is present, make detailed notes
on the carrier’s bill. Then, obtain the carrier agent’s signature and file a damage claim as soon as possible.
Open the cartons and inspect the equipment for damage. Save the cartons and packing material. If damage is
present, contact the carrier and file a damage claim immediately. If the equipment must be returned to Vicon
for repair, follow the instructions in the Shipping Information section of this manual.
The DV-202S Transmitter and CRU units are neatly packaged in compact enclosures that can be surface
mounted or shelved inside a standard rack panel. The optional add-on boards are high quality, modular, and
designed for easy installation.
The DV-202S complies with FCC Class A computing device requirements and complies with European
Community EMC Directive 89/336. The product was subjected to the testing outlined in European
Normalization Standard EN 50081-1 (Electromagnetic Compatibility-General Emissions Standard Part 1:
Residential, Commercial and Light Industry), and EN 50082-1 (Electromagnetic Compatibility-General
Immunity Standard Part 1: Residential, Commercial, and Light Industry).
TeleSite USA strongly recommends the use of line conditioners, voltage regulators, and uninterruptible power
supply (UPS) systems. For software configuration and operation, refer to the QuickSilver Global Video
Transmission System Software Manual TX001-10.
Note: Read all instructions before beginning any installation.
Note: The following instructions are “typical.” It may be necessary to deviate from them for any particular
installation.