TELES VoIPBox BRI, Справочное руководство

Страница: 279 / 280

12 Troubleshooting
VoIPBox BRI Version 18.0.002 Page 279
|
To disable CLIR in your routing settings and thus trans-
mit the calling number, you need to adjust your routing
entries in the
route.cfg
file. Remove the
#
sign from all
MapAll
entries where it is used.
|
In cases where CLIR is allowed, you need to request acti-
vation from the mobile operator.
12.3 Software update problems
In the following scenario, a software update failed.
Reasons
|
The file transmission was interrupted.
|
The system memory is full.
|
The wrong file(s) has / have been transferred.
|
Operating system and system files are not from the
same version package, such as 16.1.
|
The files have been loaded into the wrong directory (only
when using FTP for transfer).
Symptoms
|
The system cannot be accessed via GATE Manager.
|
The system can be accessed via GATE Manager, but the
system type that is displayed in the GATE Manager’s Gen-
eral Page is wrong.
|
The file size of the updated files does not match the size
of the original files.
|
The system restarts approximately every 2 minutes.
Solution
|
If you cannot reach the system at all via FTP or GATE
Manager, this is because the operating system is no
longer accessible. You need to contact your service part-
ner for help.