TELES VoIP Box BRI Series, Справочное руководство

Страница: 93 / 226

5 Additional VoIP parameters
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 93
VoipRingToneFile=</path/file.711>
Enter a G.711 file and its path which is to be played as a ring tone to the caller for calls
coming from VoIP. The ring tone is repeated until connect or disconnect of the call.
A converter tool to convert wave files to the G.711 format is available from TELES free
of charge.
VoipSignalCLIR=<string>
When the configured string appears at the beginning of the OAD and the parameter
VoipHideOadByRemove is set, the OAD is removed from signaling, regardless of the
presentation bits in the calling party field. If the parameter VoipHideOadByRemove is
not set (default), the presentation bits are set at presentation restricted (CLIR) if
<string> is -. If the string matches the first digits of the OAD and it comes in with CLIP,
the call will be sent to VoIP using CLIR. If the call comes in with CLIR, the string will be
added to the beginning of the OAD and CLIR will be removed in the signaling.
VoipSingleTcpSession=<mode>
Enter Yes to send all outgoing VoIP connections in a single TCP session. Enter No (de-
fault) for an extra TCP session for each VoIP connection.
VoipSuppressInbandInfoAvailableIndicatorInCallProceeding=<mode>
Enter yes to send or receive the Progress Indicator in the Q.931 Call Proceeding mes-
sage. Default no.
VoipTrpPayloadType=<num>
Defines the payload type for data calls when trp (transparent/clear mode) is used as
codec in VoipCompression=<list>. Default is 56. A common value is 102.
VoipUnitPeriod=<sec>
Set this parameter to a number greater or equal 1 to define how many seconds make
up a unit in the VoipLimit parameter.
Table 5.2 Customized parameters: H.323 signaling
H.323 Signaling Parameters
VoipCanOverlapSend=<mode>
Enter off to deactivate overlap sending during setup (default on).
VoipH245Transport=<int>
This option determines the H.245 offer. 0 (default)=all signaling variants are offered;
1=FastStart only; 2=H.245 tunneling only; 3=extra session.
VoipMapAddressType=<mode>
For calls from VoIP to PSTN only. Enter
yes
to change the 00 at the beginning of a num-
ber to international and 0 to national.
VoipMCinRLC= <mode>
Enter Yes to cause the system to send the media channel capability in the reverse log-
ical channel parameters as part of the H.245 negotiation (default No).
VoipRejectIncomingNonMatchingFaststart=<mode>
Setup will be rejected if the RTP codecs offered for incoming H.323 call setup with
Faststart elements do not match those configured in the parameter VoipCompres-
sion. Default No.
Table 5.1 Customized parameters: protocol-independent VoIP signaling (page 5 of 5)
Protocol-Independent VoIP Signaling Parameters