Call Forwarding
4.5.6 Unconditional Call Forwarding by Box for Certain
Port
This call forwarding is intended for remote administration. It is comparable to
call forwarding I (section 4.5.1). The difference is that you enter the
number of
the forwarding port
as well as the
call forwarding destination
.
Please note that call forwarding into the public network can be cheaper when
done by the local exchange (sections 4.5)
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
46
Enter the digits 46.
Ν
Enter the port number for which you would like to activate the
call forwarding.
Ν
Enter the call number for the call forwarding destination as you
would when dialing from the box – this means beginning
with
outside line access
for numbers in the public net.
#
Press the pound key. Listen for the confirmation tone.
Example:
Set a call forwarding for port 12 to the external destination
343434.
∗
46
12
0 343434
#
Delete:
In order to delete call forwarding, simply enter the same key
combination without destination call number.
Page 26
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
