TELES ECOTEL, Руководство пользователя

Страница: 86 / 247

C O N F I G U R A T I O N F I L E S
C H A P T E R 5
86
ECOTEL 3G 16.1. Revised: 1 March 2011.
5 . 3 . 4 R E G I S T R A R P R O F I L E S
Registrar profiles are used to register the ECOTEL with a SIP registrar. It is possible to configure different registrars
for different destinations and to define backup registrars. These registrar profiles are then assigned to the VoIP
profiles:
Table 5.25 route.cfg: Registrar Parameters
Registrar Parameters
[Registrar=<name>]
The name of the registrar profile.
RegId=<name or ip addr>
Host name or IP address used in the register’s request header. Bear in mind that the DNS service must be
active if you enter the host name.
RegOwnId=<name@ip addr/domain>
Typically a host name or telephone number followed by an @ sign and a domain name or IP address. The
entry used in the
From:
field. The default setting is
RegUser@RegId
.
RegSameCallID=<mode>
When Yes is set (default), the same caller ID is always used for SIP registration. Set No to change the caller
ID for each SIP registration.
RegContact=<name or ip addr>
Used in the
Contact:
field.
RegContactParam=<string>
Sets additional header-parameters in the contact field (e.g.the q-value: RegContactParam=q=1.0).
RegUser=<name>
Enter a username for authorization.
RegPwd=<password>
Enter a password for authorization.
RegProxy=<ip addr>
Enter an alternative IP address if you want the request to be sent to an address other than the one entered
in
RegId
.
RegExpires=<sec>
Enter the number of seconds registration is to be valid. Default
0
means infinite.
RegPing=<sec>
Interval (in seconds) for the registrar ping. The ECOTEL sends an empty UDP packet to the registrar’s IP ad-
dress. The packet is essentially an alive packet to avoid possible firewall problems.