TELES ECOTEL, Руководство пользователя

Страница: 39 / 247

C O N F I G U R A T I O N F I L E S
C H A P T E R 5
39
ECOTEL 3G 16.1. Revised: 1 March 2011.
5 C O N F I G U R A T I O N F I L E S
This chapter describes the basic setup and the most commonly used entries for the configuration files. Configura-
tion of ECOTELs is managed in the following three files:
The system comes without the files. The default configuration with the IP address 192.168.1.2 is active when the
files are not on the system. You can configure the system using Quickstart, GATE Manager or via FTP (user
teles
,
password
tcs-ag
). If you use the GUI to make configuration changes, the files will be adjusted automatically.
Make sure you secure the system with new passwords following configuration and remember to memorize the
passwords!
These configuration files contain all system-specific settings and are used when the system starts. Comments in-
cluded in these files must begin with a semicolon. They do not need to be at the beginning of a line. Configuration
files must end with an empty line.
The configuration files follow these conventions: Individual files are divided into sections. These sections always
begin with a line entry in square brackets. The basic required sections are in these files:
Table 5.1 Configuration Files
File Function
ip.cfg
This file is for the basic configuration of the Ethernet interfaces.
pabx.cfg
This file is for system-specific and port-specific settings.
route.cfg
This file is for routing entries.
Changing configuration data may lead to malfunctions and/or misrouting, as well as
possible consequential damage. All changes are made at own risk. TELES is not liable
for any possible damage out of or in relation to such changes. Please thoroughly
check any changes you or a third party have made to your configuration.
Table 5.2 Required Configuration File Sections
Section File Function
[System] pabx.cfg
route.cfg
ip.cfg
This section contains the system’s basic settings.
[Night<num>]
EXAMPLE:
[Night1]
[Night2]
pabx.cfg
route.cfg
This section contains time dependent entries that only apply for
limited times.
i
i