TELES ECOTEL, Руководство пользователя

Страница: 201 / 247

O N L I N E T R A F F I C M O N I T O R
C H A P T E R 1 1
201
ECOTEL 3G 16.1. Revised: 2011.
CDRs for Callback and Two-Stage Calls
In the case of CDR entries for DLA/Callback calls, the beginning and ending times for the first call leg is always
used as the call time. The call time in seconds appears first for the first leg, followed by a slash and the connection
time for the second leg.
Example:
Specific Cause Values
The ECOTEL will generate cause values that represent an event, such as exceeding a defined limit:
1 1 . 2 . 2 M I S S E D C A L L S L I S T
All incoming calls that are not connected can be recorded in a list to facilitate return calls. Recording is activated
using the
failedlog=<name>
entry in the
pabx.cfg
. Specify a file name, e.g.
failedlog=failed.log
. Once this setting is made, recording begins at once.
Each line represents an unaccepted incoming call with the following information separated by commas:
C1,24.11.09-17:15:29,24.11.09-17:15:57,[0002:01]CB,[0008:01]DLA,,172.20.25.103:172.20.25.103,G711a,20,0102,28/3,90,0,,,
0a One of the following limits has been reached:

Unit limit defined in the port’s subscriber line

Unit limit per SIM assignment via vGATE
0b Maximum call duration assigned via vGATE has been reached
0c Maximum call duration based on mapping entry settings has been reached
0d Maximum number of minutes per SIM assignment via vGATE has been reached
10, 1f Normal call termination (disconnected by calling party)
To avoid sending these values as the reason for call teardown, translate the cause
values to standard values Chapter 8.2

Table 11.3 Failed Log Entries
Column Description
0
Version
1
Start time (format DD.MM.YY-hh.mm.ss)
2
Source. The following format applies: [node number:automatically set internal channel
number]
3
Destination. The following format applies: [node number:automatically set internal chan-
nel number]
4
IMSI
i
i