TELES ECOTEL, Руководство пользователя

Страница: 174 / 247

M O B I L E C O N F I G U R A T I O N O P T I O N S
C H A P T E R 9
174
ECOTEL 3G 16.1. Revised: 2011.
with the LAIN 26213:
9 . 1 1 O P T I O N A L M O B I L E Q U A L I T Y P A R A M E T E R S
The following parameters can be set for specific carriers if SIM cards for different mobile networks are used and
different configurations must be set.
For all controllers without an LAIN, the following default setting applies:
UMTS=
Up to four additional carrier-specific entries may be set:
UMTS1=<Lain1> ALFI[<val1/val0>]...
UMTS2=<Lain2> ...
UMTS3=<Lain3> ...
UMTS4=<Lain4> ...
Up to four LAIN-specific configurations are possible. The user must enter the index (1 to 4). The LAIN appears as
the first entry behind the equal sign. Everything else follows.
The following table describes specific signaling and quality parameters for configuration of the mobile interface.
DialBack=5
MapAll1111=262121111
MapAll2222=262122222
MapAll3333=262133333
Make sure that no
Restrict
entries are configured for these mobile controllers.
There is no automatic default behavior for this feature! All options must always be
entered. We recommend that you enter
UMTS=
settings, as all controllers without a
LAIN or with a default address use these options!
Table 9.1 Optional Mobile Parameters
UMTS=...
Enter any of the following parameters after the equal sign for the following functions. Entries may appear in any
order, but all entries must appear in the same line and in double-digit notation as follows:
UMTS=RSSI[10] STOP[18,08] ANNOUNCE[00,08] FAX[a2] ASR[20,35]
ALERT[<sec>]
Set this parameter to generate an alert signal in the D channel immediately after the
dial-end signal. If you enter optional square brackets containing a number of sec-
onds, the alert signal will occur when the number entered has passed following set-
up.
i
i
i
i