35
Parameterization
Feed the guide tabs of the screw cap (positioned to be
rotated) into the grooves of the transmitter housing.
Tighten the screw cover on the battery and rechargeable
battery compartment by turning it clockwise, pressing it
firmly onto the compartment at the same time.
Guide tab
Groove for guide tab
Turn the screw cover on the battery and rechargeable battery
compartment counterclockwise and pull off the lock.
Insert the left battery / the left rechargeable battery, obser-
ving the correct polarity (negative pole points upwards).
Insert the right battery / the right rechargeable battery, ob-
serving the correct polarity (negative pole points upwards).
16 3 1 Fitting batteries/rechargeable batteries in the
transmitter
Switch the vehicle ignition on and start the vehicle.
Use the On button to switch on the transmitter.
The diagnostics LED on the receiver blinks green.
The status LED on the transmitter flashes green (if battery
full / rechargeable battery charged).
1 s
On button
Off button
Status LED
Operating level LED
Switching on the transmitter F6 S
Press the stop and emergency call switch.
First, the pre-alarm (2 s tone, 2 s silence) and the main
alarm after 60 seconds (1 s tone, 1 s silence) by the siren.
The status LED on the transmitter blinks rapidly (green) (if
battery full / rechargeable battery charged).
16 3 Functional test
NOTICE!
Generally perform the following points prior to
commencing work!
