23
Functional Description
8 2 5
Changing the radio channel
If there are faults due to radio controls being operated in parallel,
the radio channel can be changed (factory setting: channel 2).
The radio control F6 operates in the 70 cm ISM band and can be
operated on 3 radio channels:
Channel 1: 434.175 MHz
Channel 2: 434.475 MHz
Channel 3: 434.675 MHz
Switch off transmitter, receiver must be under voltage
Press and hold a button on the transmitter for longer than
5 seconds, the operating LED lights up
Changing to next channel up
The status LED goes off after a successful channel change
DANGER!
Danger from accidental operation of machinery
When multiple radio controls are used in parallel, provi-
de the transmitters and vehicles (receivers) with unique
number stickers in order to prevent confusion, and thus
accidental operation.