Industrial Modem MIU56 User Guide
MIU56Robert Way
Page 15
2/28/2003
&F1
Restore non-error correction factory defaults
&F.
Reset modem (clear security database/Telephone numbers)
&G0
No guard tone generated
&G1
550 Hz guard tone generated
&G2
1800 Hz guard tone generated
&K0
Flow
control
disabled
&K3
RTS/CTS
flow
control
&K4
XON/XOFF
flow
control
&K5
Transparent XON/XOFF flow control
&K9
Failsafe
flow
control
&M0
Asynchronous
mode
&N0
Abort dial character disabled
&N1
Abort dial character enabled
&P0
39/61 make/break ratio (USA)
&P1
33/67 make/break ratio (Aus/UK)
&S0
DSR signal always asserted
&S1
DSR signal asserted at start of handshake
&S2
DSR signal asserted at end of handshake (before CONNECT message)
&T0
Terminate
current
test
&T1
Local Analogue Loopback test
&T3
Local Digital Loopback test
&T4
Grant Remote Digital Loopback test
&T5
Deny Remote Digital Loopback test
&T6
Remote Digital Loopback test
&T7
Remote Digital Loopback with Self-test
&T8
Local Analog Loopback with Self-test
&V
View active configuration profile
&Vn
View stored profile (n=0-3)
&V8
View differences between active and default
&Wn
Save current configuration into stored profile n (n=0,1,2,3)
&Yn
Select stored profile n for Power on and &D3
&Zn=x
Store x as phone number n (x=0-9)
#A0
Prevent
Remote
Access
#A1
Allow remote access
#A2
Allow remote access with security password
#ALMn=x
Dial number/s x (x=0-9 in &Z) for remote alert n
#B0
In 1200bps originate mode B0=V.23, B2=V.22
#B1
In 1200bps originate mode B0=V.22, B2=V.23
#C0
V.25 calling tones disabled
#C1
V.25 calling tones enabled
#J0
Assume V.42 compatibility
#J1
Check
V.42
compatibility
#K0
Disable
MNP
10
#K1
Enable MNP 10
#K2
Enable MNP 10 for Cellular links
#MEM0
All voice features off
#MEM1
Voice mode after S110 rings if DTR is low
#MEM2
Voice mode after S110 rings regardless of DTR
#MINI
Erase Voice mode alarm message
#M0
AT command operation
#O0
Characters ignored if modem buffers overflow
