Telemark CHEETAH TT-10 CE 208 VAC, Инструкция по эксплуатации, Страница: 7 / 39

Telemark TT Cheetah Series Power Supply Instruction Manual
7
2
GENERAL DESCRIPTION
The TT series of Electron Beam Source Power Supplies are compatible with
electron beam sources which use electro-magnetic deflection or a
combination of permanent magnet deflection and electro-magnetic focusing.
This High Voltage Power Supply (HVPS) incorporates the latest in fast
response Tetrode Tube high voltage regulation and switching technology.
Each unit is packaged in a single, 19" rack-mountable chassis (TT-3/6/8) or a
stand-alone cabinet on casters (TT-10/15/20) with approximate dimensions
as below. Approximately 2" (50mm) are additionally required behind the rack
mount chassis for connections.
TT-3: W 19" (483mm) x D 22" (560mm) x H 10.5" (267mm) [6U]
TT-6: W 19" (483mm) x D 25" (635mm) x H 14" (356mm) [8U]
TT-8: W 19" (483mm) x D 29" (740mm) x H 15.75" (400mm) [9U]
TT-10/15/20: W 23" (585mm) x D 27.5" (700mm) x H 35" (890mm)
Operation of the HVPS requires connection to its controller unit, which is
housed in a separate 19" chassis 1U high (1.75" or 44,5mm). The Controller
permits operation of the HVPS both locally and remotely, while providing
visual status indications.
The TT-3/6/8 power supplies will operate only one electron beam source at a
time, but multiple supplies may be utilized to operate two or more sources.
The TT-10/15/20 can operate up to three electron beam sources
simultaneously (optional).
A series of system safety interlocks are available to protect both operator and
the equipment.