Telemark CHEETAH TT-10 CE 208 VAC, Инструкция по эксплуатации, Страница: 6 / 39

Telemark TT Cheetah Series Power Supply Instruction Manual
6
1
UNPACKING
Remove the High Voltage Power Supply (HVPS) and Controller from their
crate/carton(s), but do not discard the packing materials; retain the packing
materials and carton in case the unit needs to be returned.
Inspect the unit for dents or other damage, which may have occurred during
shipping. In the unusual event that shipment damage has occurred, contact
the transportation company and Telemark immediately.
The additional material enclosed in the shipping boxes (such as cables etc.)
should be inspected as well. Put them aside and DO NOT proceed until this
instruction manual has been thoroughly reviewed. After completely unpacking
the boxes, you should have the following items: (see also packing list)
1. High Voltage Module
2. Control Module
3. Filament Transformer Box
4. Cable 25pin Sub-D, M-F
5. Cable 9pin Sub-D, M-F
6. HV Coax Cable RG213
7. Filament Power Cable, Hirschmann 3pin, M-F, grey
8. Sweep Power Cable, Hirschmann 2 pin, M-EURO/IEC
9. EMO Connector, Hirschmann 2 pin M
10. HV Cable Set, dual red filament cable, 42" (1m)
11. 15pin Sub-D Connector, M
12. Connector Shell Sub-D 15
13. 37pin Sub-D Connector, M
14. Connector Shell Sub-D 37
15. 2 ea. Strain Relief 3/4" NPT
16. Power Connector Shell, AMP } TT-
17. Cable Clamp for Power Connector, AMP } 3/6/8
18. 5 ea. Crimp Pins for Power Connector, AMP } only