5
Configuration
30 / 56
DoorLine Slim DECT
5.9
Enabling door opener function
For security reasons to prevent unauthorised opening, the door cannot be
opened if the connection was set up from the telephone to the door intercom.
This function can be deactivated if desired.
1.
Enter the configuration mode (see chapter Entry to config-
uration mode [
2.
Actuate the hashtag button and star button on the tele-
phone
3.
Enter configuration command "04" at the telephone
As confirmation, you will hear a neutral acknowledgement
tone
4.
Enter digit 1 to enable the door opener function or
digit 0 to block the door opener function
Finally, you will hear the positive acknowledgement tone
5.10
Defining door opener time
Actuation time of the door opener.
Possible values: 1 to 9 seconds or deactivate with 0
Delivery status: 3 seconds
With door opening with redial #9
If relay contact 2 was defined as door opener
or
if a contact of a SwitchBox was defined as door opener with redial #9.
