4
Assembly and connection
14 / 56
DoorLine Slim DECT
1. Position the mounting plate (
1
) on a standard in-wall socket (
2
) or a suitable
cavity in the masonry. The recess in the mounting plate must be fitted ac-
curately on the in-wall socket.
2. Ensure that no supply lines, cables or similar are installed in the area of the
drilling holes (
3
).
3. Fasten the mounting plate via the two boreholes (
3
) onto the wall with
screws and dowels.
4. Press the sealing flange (
4
) into the recess on the mounting plate (
1
).
4.5.2
Installing device on mounting plate
Fig. 3:
1. Connect the terminals (
1
) (see chapter Connecting device [
15]).
2. Insert the terminals (
1
) back into the device.
3. Place the device diagonally from above onto the mounting plate until the
four metal lugs (
2
) engage in the four fastening holes of the device.
4. Secure the device with the hexagon socket-grub screw (
3
) on the mounting
plate.
Caution:
Only tighten the screw lightly because otherwise the thread can
be damaged.
