manualshive.com logo in svg

Teleflex TFX100ID, Руководство по эксплуатации


Поделиться
Скачать
background image

18

MAINTENANCE

Your Teleflex 

100ID

depthsounder is designed to provide you with years of

trouble-free operation with virtually no maintenance. Follow the simple
procedures below to ensure that your 

100ID

continues to deliver top perfor-

mance.

If the unit comes into contact with salt spray, simply wipe the affected
surfaces with a cloth dampened in fresh water.

When cleaning the LCD protective lens, use a chamois and non-abrasive,
mild cleaner. Do not wipe while dirt or grease is on the lens. Be careful to
avoid scratching the lens.

If your boat remains in the water for long periods of time, algae and other
marine growth can reduce the effectiveness of an externally mounted trans-
ducer. Periodically clean the face of the transducer with liquid detergent.
Pivoting the transducer up in the bracket may allow better access for inspec-
tion or cleaning.

If your boat remains out of the water for a long period of time, it may take
some time to wet the transducer when returned to the water. Small air
bubbles can cling to the surface of the transducer and interfere with proper
operation. These bubbles will dissipate with time, or you may wipe the face
of the transducer with your fingers after the transducer is in the water.

Do not attempt to repair the 

100ID

yourself. There are no user serviceable parts

inside, and special tools and techniques are required for reassembly to ensure
the integrity of the housing. 

Repairs should be performed only by autho-

rized Techsonic technicians.

MAINTENANCE AND WARRANTY

MAINTENANCE

Содержание TFX100ID




























Отзывы:

Нет отзывов

Похожие инструкции для TFX100ID

Furuno CSH-5L/CSH-8L Operator'S Manual preview
CSH-5L/CSH-8L
Бренд: Furuno Страницы: 89

Бренды по названию

Популярные бренды

Загрузить еще бренды