11
Snapshot Quota
: Set the capacity proportion of captured pictures on the SD card.
Video Quota
: Set the capacity proportion of record files on the SD card.
Schedule Recording Settings
1.
Go to Config
System
Storage
Record to go to the interface as shown below.
2.
Set record stream, pre-record time, cycle writing.
Pre Record Time
: Set the time to record before the actual recording begins.
3.
Set schedule recording.
C
heck “Enable Schedule Record” and set the schedule.
Weekly schedule
Set the alarm time from Monday to Sunday for a single week. Each day is divided in one hour
increments. Green means scheduled. Blank means unscheduled.
“Add”: Add the schedule for a special day. Drag the mouse to set the time on the timeline.
“Erase”: Delete the schedule. Drag the mouse to erase the time on the timeline.
Manual Input: Click it for a specific day to enter specific start and end times. This adds more
granularities (minutes).
