Teledyne WORKHORSE Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 258

Teledyne WORKHORSE Скачать руководство пользователя страница 135

WorkHorse H-ADCP Operation Manual

May

2015

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

Page 123

Command Descriptions

Each listing includes the command’s purpose, format, default setting (if applicable) range, recommended

setting, and description. When appropriate, we include amplifying notes and examples. If a numeric value

follows the command, the H-ADCP uses it to set a processing value (time, range, percentage, processing

flags). All measurement values are in metric units (mm, cm, and dm).

? – Help Menus

Purpose

Lists the major help groups.

Format

x? (see description)

Description

Entering ? by itself displays all command groups. To display help for one command

group, enter x?, where x is the command group you wish to view. When the H-ADCP dis-

plays the help for a command group, it also shows the format and present setting of those

commands. To see the help or setting for one command, enter the command followed by

a question mark. For example, to view the WP-command setting enter WP?.

Examples

See below.

[BREAK Wakeup A]

WorkHorse Broadband H-ADCP Version 16.xx
Teledyne RD Instruments (c) 1996-2005
All Rights reserved.
>?
Available Menus:
DEPLOY? ------------------ Deployment Commands
SYSTEM? ------------------ System Control, Data Recovery and Testing Commands

Available Commands:

C? ----------------------- CONTROL Commands
E? ----------------------- ENVIRONMENTAL SENSORS Commands
P? ----------------------- PERFORMANCE Commands
S? ----------------------- RDS^3 SYNCHRONIZATION Commands
T? ----------------------- TIMING Commands
W? ----------------------- WATER PROFILING Commands
R? ----------------------- RECORDER Commands
A? ----------------------- SENSOR/COMPASS Commands
O? ----------------------- FEATURE Commands
D? ----------------------- APPLIED MICROSYSTEMS Commands
?? ----------------------- DISPLAY Quick Menus
>

«
...
133
134
135
136
137
...
»

Содержание WORKHORSE



































































































































































































































































Отзывы:

Нет отзывов