Teledyne T200H, Руководство пользователя, Страница: 36 / 353

Getting Started Teledyne API - Model T200H/T200M Operation Manual
34
Table 3-4: Analog Output Data Type Default Settings
PARAMETER
CHANNEL DEFAULT SETTING
A1 A2 A3 A4
3
DATA TYPE
1
NXCNC1 NOCNC1 N2CNC1 NXCNC2
RANGE 0 - 5 VDC
2
REC OFS 0 mVDC
AUTO CAL. ON
CALIBRATED NO
OUTPUT ON
SCALE 100 ppm
UPDATE 5 sec
1
See Table A-6 of T200H/M Appendix A for definitions of these DAS data types
2
Optional current loop outputs are available for analog output channels A1-A3.
3
On analyzers with O
2
sensor options installed, DAS parameter O2CONC is assigned to output A4.
To access these signals attach a strip chart recorder and/or data-logger to the appropriate
contacts of the analog output connecter on the rear panel of the analyzer.
ANALOG OUT
A1 A2 A3 A4
+ - + - + - + -
Figure 3-7: Analog Output Connector
Table 3-5: Analog Output Pin-Outs
PIN ANALOG OUTPUT VOLTAGE SIGNAL CURRENT SIGNAL
1 A1 V Out I Out +
2 Ground I Out -
3 A2 V Out I Out +
4 Ground I Out -
5 A3 V Out I Out +
6 Ground I Out -
7 A4 V Out Not Available
8 Ground Not Available
07270D DCN7141