SyriXus Series Pumps Installation and Operation Guide
Section 2 Fluid System Connections and Accessories
2-9
EAR99 Technology Subject to Restrictions Contained on the Cover Page
Figure 2-6
Refill kit installation
2.3.2 Manual Outlet
Valve Kit
The optional manual outlet valve kit provides manual control of the
pump outlet port by connecting a shutoff valve between the pump and
the rest of the system.
Kit installation
1. Attach the two-way valve using the spacer block and pan-head
screws.
a. For the 500x pump, screw the male adapter into the pump
outlet.
2. Connect the pre-bent length of stainless steel tubing to the outlet
port on the pump using the nut and ferrule. Connect the other
end to the top port on the valve using the valve fitting.
NOTE
For the 500x, this piece of tubing should be cut to the proper length
for connection to your system. Due to the wide variety of applica-
tions for this model, fittings to connect the tubing to your system are
not provided in the kit.
Table 2-2 Manual Refill Kits
Pump Model
Part Number
1000x
68-1247-117
500x
68-1247-083
260x
68-1247-077
65x
68-1247-127
to
system
nut, ferrule
pre-bent
SST tubing
filter
valve
PTFE tubing
or
stainless steel tubing
spacer block