manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 40 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 40

Teledyne LeCroy

Using the Software

38

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

tocol Analysis” on page 49

).

Jammer:

 

The InFusion™ Error Injector and Traffic Modifier is an error injector 

and traffic modification tool that allows you to verify real

‐

world fault handling 

(see 

“InFusion Overview” on page 367

).

Protocol

 

Analyzer

 

Initiator

 

Emulator

 

(SAS):

 Generates bus traffic for capture. It 

also has Easy Mode and Advanced Mode (see 

“Emulation” on page 125

).

Target

 

Emulator

 

(SAS)

: Acts as target (see 

“Target and Device Emulation” on 

page 184

).

Protocol

 

Analyzer

 

Host

 

Emulator

 

(SATA):

 Generates bus traffic for capture. It 

also has Easy Mode and Advanced Mode (see 

“Emulation” on page 125

).

Device

 

Emulator

 

(SATA)

: Acts as device (see 

“Target and Device Emulation” on 

page 184

).

The SAS/SATA application now provides functionality for both protocols. Either protocol  
can now be accessed via the 

File

 menu and choosing the protocol to work with. Click 

File>

 

New

 and select the desired protocol and application.

Figure 1.19: File Menu

To switch between protocols click 

Window

 and the select the trace or application to use.

Depending on the protocol in use, the relevant functions and menu options are available 
and the others are greyed out (see 

Figure 1.20 on page 39

).

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов