manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 293 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 293

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

291

Navi View Toolbar

 Teledyne LeCroy

Figure 3.100: Second Level of Multilevel Filtering

.

Figure 3.101: Third Level of Multilevel Filtering

Filter descending packets from trace highlight bar

If you check the 

Filter

 

descend

 

packets

 

if

 

ascend

 

packet

 

is

 

filtered

 

checkbox, the 

application will only filter onward from the highlighted trace selection bar.

If you uncheck this option, the software only filters the filtered packet. For example, if this 
option is checked and any SCSI command is selected, all transport and link packets of this 
command are filtered. If you unchecked this option, only selected SCSI commands are 
filtered.

3.8.4

Selectable Filter Options for SAS

The SAS Filter Options are:

Command Data Pattern

Bus Condition

Primitive

Incomplete Frames

Address Frames

SSP Frames

SMP Frames

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов