manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 236 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 236

Teledyne LeCroy

Analysis

234

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

3. Expand the Information Unit.

Figure 3.17: Information unit. 

4. Expand Sense Data. The hidden fields are revealed.

Figure 3.18: Sense data. 

Figure 3.19: Sense data expanded. 

Go to Command / Go to Response

The Go to Command / Go to Response feature can be used to scroll through a large data 
packet to find SCSI commands and responses.

To use the Go to Command / Go to Response feature, open a trace with a data packet and 
“Right Click” on the Data section of the packet (TimeStamp = 35.965 us). See 

Figure 3.20 

on page 235

.

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов