manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 224 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 224

Teledyne LeCroy

Viewer Display

222

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Figure 3.2: SATA: Packet View of .sts Sample File.

3.1.2

Quick View

By default, the settings in 

Preferences

 enable 

Quick

 

View

. Quick View allows full access 

to the whole trace more quickly, especially when using a Gigabit Ethernet connection. 
However, the trace is NOT written to the host machine’s hard drive. To save the trace, you 
must manually click 

Save

. 

If you uncheck 

Quick

 

View

 in the 

Preferences

 

to disable Quick View, the trace loads more 

slowly, but is automatically saved to the host machine’s hard drive. When Quick View is 
disabled, the Viewer displays successive parts of trace data as they upload. As soon as a 
trace part uploads, it is available in all trace views. 

If you only need quick successive traces, and do not need to save them, keep the default 
setting to enable Quick View.

If you need to save all captured traces, unchecking the Quick View setting loads traces 
faster, especially for larger traces and slower connections than Gigabit Ethernet.

To refresh the viewer display with more uploaded data, scroll to the end of the trace, 
using scroll bars, page down, arrow down, or CTRL

‐

End. Newly uploaded data then 

appears there.

Note:

High

‐

level decoding and statistics are available only after the whole trace has uploaded.

The software automatically switches to full trace view after trace uploading finishes.

Note:

Users must press 

CTRL

 

Home

 to go to the beginning of an uploaded trace, and 

CTRL

 

End

 to go to 

the end of an uploaded trace.

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов