Teledyne Sierra M6-2, Руководство пользователя, Страница: 142 / 538

Teledyne LeCroy Emulation
140 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
Figure 2.141: SATA: Wait for Power Management
Insert Delay
To delay program execution, insert a Delay instruction. Enter the delay value
(in microseconds) in the number text box to define a delay.
Figure 2.142: Delay
Add Stop
To define the end of the Initiator Emulator program, insert the Stop Initiator Exerciser
instruction.
Figure 2.143: Stop
Add a Label
Add a label to any command, to use for conditional and unconditional jumps. Click the
command to label, and insert the Label instruction. You can also insert a label by right
‐
clicking a command and choosing Add Label.
Figure 2.144: Label
Labels are automatically labeled as Label# sequentially as they are added. However, you
can assign them meaningful names such as STOP and START.
Note:
Any label that you create must begin with an alphabetic symbol, not a number. Labels that begin
with numbers will be ignored.
Instruction insert
You can set the instruction to insert before or after a command by setting the insertion
mode. To set the insertion mode, right
‐ click in the initiator page and choose Insert before
current position or Insert after current position.