Teledyne Sierra M6-2, Руководство пользователя, Страница: 139 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 137
Emulation Teledyne LeCroy
To insert an instruction, click a command in the Initiator Emulator program where you
want the instruction inserted, then click the
Insert Instruction button, then choose the
instruction to insert.
Figure 2.132: Insert Instructions Dropdown List
Start Loop
Click the command at which to start the loop, and then insert the Loop Start instruction.
Figure 2.133: Start Loop
Loop Count
Enter the number of times to run the loop in the number text box, or click the down
arrow on the Count Drop
‐ down combo box and choose Infinite.
End Loop
Click the command at which to stop the loop, and then insert the Loop End instruction.
Figure 2.134: End Loop
Add a Goto
To insert an unconditional jump to a previously labeled command, insert a Goto
instruction. Then click the down arrow on the Drop
‐ down combo box and choose the
label to designate the destination command.
Figure 2.135: Goto