manualshive.com logo in svg

Teledyne SeaBat T Series, Руководство оператора, Страница: 22 / 152

Поделиться
Скачать
Teledyne SeaBat T Series Скачать руководство пользователя страница 22

SAFETY PRECAUTIONS

SeaBat T-Series Subsea Operator's Manual

Page 10

January 31, 2019

Version 7

2.4

Electrical Isolation

Electrical isolation for titanium components may be achieved by using nonconductive bushings, 
washers, and isolation plates to insulate them from the mounting brackets. Common nonconductive 
materials include Delrin, G-10/FR4 glass fiber sheets, or high-density polyethylene sheets.

CAUTION

If the sonar head is not isolated from the mounting structure, galvanic corrosion will result in 
the mounting structure itself.

NOTE

Contact Teledyne RESON for additional information on schemes for electrical isolation.

2.5

Exposure to Sunlight

Do not allow the projector and receiver arrays to sit in direct sunlight when not in use, but cover 
the arrays with a bag. In addition to furthering corrosive effects, continued exposure to ultraviolet 
(UV) rays will damage the polyurethane array face.

2.6

Safe Disposal of Waste (WEEE Directive)

The use of the crossed-out dustbin logo indicates that this product is subject to 
directive 2012/19/EU, known as the Waste Electrical and Electronic Equipment 
Directive. The WEEE Directive specifies that used electric/electronic equipment may 
not be treated as household waste, but must be sorted separately for disposal. These 
rules concern all your Teledyne RESON products (computer, monitor, transducer, 
processor, probe, etc.) and also all accessories (keyboard, mouse, etc.). By ensuring 
this product is disposed of correctly, you will help protect the environment.

For more detailed information about the recycling of this product, please contact your local 
authority, your household waste disposal service provider, or Teledyne RESON Customer 
Support (

[email protected]

).

Содержание SeaBat T Series

























































































































































Отзывы:

Нет отзывов