Teledyne Q-Lite Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 242

Teledyne Q-Lite Скачать руководство пользователя страница 60

Q-Lite Satellite Modem Installation and Operating Handbook

6-27

6.2.4.11 Mute LNB Services in Standby

This is an On/Off control used to enable and disable the transfer of LNB DC and 10MHz
services from a failed modem to a backup modem in a 1:1 or 1:N redundancy system.
Setting the checkbox causes the services to switch over from the online modem to the
backup modem on a failure.

6.2.5 Edit->Unit Screen

The

Edit->Unit

screen contains the following tab menu options:

•

M&C.

This controls remote M&C settings including serial control settings and user

passwords.

•

Alarms.

This controls alarm thresholds and actions.

•

Station Clock.

This controls the station clock, which replaces the internal 10MHz

clock reference, allowing a number of modems to share a common clock source.

•

SAF.

This allows the entry of Software Activated Feature (SAF) codes that enable

modem feature activation in the field.

•

Upgrade.

This allows the modem software to be upgraded.

•

Miscellaneous.

This allows the date and time to be set on the modem, as well as

allowing a modem to be reset without having to power it down.

6.2.6 Edit->Unit->M&C Screen

The

Edit->Unit->M&C

screen is shown in

Figure 6-9

.

«
...
58
59
60
61
62
...
»

Содержание Q-Lite



















































































































































































































































Отзывы:

Нет отзывов