Chapter 5
Configuration APIs
85
PicamParameter_EMIccdGainControlMode
Determines how the intensifier gain and electron
multiplication gain are controlled in emICCD hardware via the
data enumeration.
Refer to
Section 5.1.1.8, PicamEMIccdGainControlMode
, on
page 75, for additional information.
PicamParameter_EnableAuxOutput
Enables the AUX output pulse.
PicamParameter_EnableIntensifier
Enables the intensifier.
NOTE:
The intensifier must be enabled and powered on for
it to function.
PicamParameter_EnableModulation
Enables RF modulation for intensified hardware.
PicamParameter_EnableModulationOutput
Signal
Enables an RF output signal from intensified hardware to be
used as the user sees fit.
PicamParameter_EnableNondestructive
Readout
Allows the hardware to periodically readout while exposing.
PicamParameter_EnableSensorWindow
Heater
Enables the sensor window to heat up in an effort to prevent
condensation.
PicamParameter_EnableSyncMaster
Enables SyncMASTER1 and SyncMASTER2 gate pulses.
PicamParameter_ExactReadoutCount
Maximum
Reports the maximum number of readouts the hardware can
acquire.
NOTE:
This does not include non-destructive readouts from
hardware that supports the feature.
PicamParameter_ExposureTime
Controls the time the sensor is exposed in milliseconds (mS).
PicamParameter_ExternalShutterStatus
Reports the status of the shutter that is external to the
hardware via the
data enumeration.
Refer to
Section 5.1.1.31, PicamShutterStatus
additional information.
PicamParameter_ExternalShutterType
Reports the type of shutter that is external to, and can be
driven by, the hardware via the
data
enumeration.
Refer to
Section 5.1.1.33, PicamShutterType
additional information.
PicamParameter_FocalLength
Reports the optical path length from the focusing mirror to
the sensor in millimeters (mm).
PicamParameter_FrameRateCalculation
Reports the estimated frame rate in frames-per-second.
NOTE:
If there is more than one frame-per-readout, this
represents the burst frame rate within the readout.
NOTE:
If the hardware is being externally triggered, this
represents the fastest possible rate.
PicamParameter_FrameSize
Reports the size, in bytes, of a data frame.
PicamParameter_FramesPerReadout
Reports the number of frames contained in one readout.
PicamParameter_FrameStride
Reports the length, in bytes, necessary to traverse to the next
frame.
Table 5-23:
PicamParameter
Enumerator Definitions (Sheet 3 of 11)
Enumerator
Description
Содержание Princeton Instruments PICam 5.x
