Teledyne Princeton Instruments IsoPlane 81 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 62

background image

5

Chapter 1:

About this Manual

Thank you for purchasing an IsoPlane

®

81 Imaging Spectrometer System from Teledyne

Princeton Instruments (TPI). Since 1981, Teledyne Princeton Instruments has been the
legendary name behind the most revolutionary spectroscopy and imaging products for
cutting-edge research.

Please read the manual carefully before operating the system. This will help you
optimize the many features of this system to suit your research needs.

If you have any questions about the information contained in this manual, contact the
Teledyne Princeton Instruments customer service department. Refer to Contact
Information (in the Warranty and Service section at the end of this manual).

1.1

Intended Audience

This user manual is intended to be used by scientists and other personnel responsible
for the installation, setup, configuration, and acquisition of imaging data collected
using an IsoPlane 81 system.

This document provides all information necessary to safely install, configure, and
operate the IsoPlane 81, beginning with the system’s initial installation.

1.2

Related Documentation

Table 1-1 provides a list of related documentation and user manuals that may be useful
when working with the IsoPlane 81 system. To guarantee up-to-date information,
always refer to the current release of each document listed.

Teledyne Princeton Instruments maintains updated documentation and user manuals
on their FTP site. Visit the Teledyne Princeton Instruments FTP Site to verify that the
most recent user manual is available and being referenced:

ftp://ftp.princetoninstruments.com/Public/Manuals/Princeton

Instruments

Table 1-1:

Related Documentation

Document Number

Document Title

4411-0157

IsoPlane 81 785 nm Multimode Diode Laser Source User Manual

–

IsoPlane 81 Imaging Spectrometer System Data Sheet

«
...
3
4
5
6
7
...
»

Содержание Princeton Instruments IsoPlane 81































































Отзывы:

Нет отзывов

Похожие инструкции для Princeton Instruments IsoPlane 81

Бренд: Makita Страницы: 10

Бренд: NAD Страницы: 10

Бренд: Keithley Страницы: 42

Бренд: Tascam Страницы: 80

Бренд: Tascam Страницы: 2

Бренд: Walker Страницы: 24

Бренд: G-Systems Страницы: 60

Бренд: G-Lab Страницы: 16

Бренд: G&G Страницы: 2

Бренд: Rath Страницы: 5

Бренд: Vaisala Страницы: 2

C-HB-A-LB2-SCCT Series

Бренд: C-LITE Страницы: 9

X-431 Torque HD

Бренд: Launch Страницы: 3

Бренд: Gardol Страницы: 80

Serious Steel 805106

Бренд: ParaBody Страницы: 6

Z33-D060.02 S2A

Бренд: Jäger Страницы: 36

Royal Squat Rack SX-5 II

Бренд: KingsBox Страницы: 5

Бренд: Anslut Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды