Teledyne MagnaStar C-2000, Руководство пользователя

Страница: 50 / 100

®
39
(Rev. 8/04)
C3. Call Forwarding
A handset can be configured such that incoming calls (Inplane,
Air/Ground, and SATCOM) are automatically redirected to another
handset.
The user activates this feature by taking the handset off-hook and
pressing “9” (Setup) -“6” (Call Fwd), and then enter the “Destination
Inplane Number.”
NOTE 1: If activated, Call Forwarding is indicated with highlighted text on the
Source (“Fwd To x”) and Destination (“Fwd From y”) handsets (with
Inplane numbers “x” and “y”) on the “Services” menu (i.e., menu
displayed while handset is in bezel).
NOTE 2: If desired, more than one handset can be forwarded to another handset.
The user deactivates this feature by using any of the following options:
Option #1: Take the handset off-hook and press: “9” (Setup) -“6” (Call
Fwd) - “Destination Inplane Number” (which is highlighted on menu).
Option #2: Take the handset off-hook and press: “9” (Setup) - “6”
(Call Fwd) - “Current Inplane Number” (i.e. forward back to self).
Option #3: Call Forwarding is automatically cleared from memory
when the ARTU unit is powered down.
C4. Viewing a Terminal ID
The handset’s assigned Station Terminal ID will display on the
“Services” menu.
An Aircraft Terminal ID is displayed by taking the handset “off-hook”
and then pressing “8” (Aircall) followed by pressing “+” (More) twice.