M41d HBR3 Video Analyzer/Generator - Quick Start Guide
Rev. A1
Page 13
Rev A6 - May 29, 2020
5
Managing the M41d with ATP Manager
from a PC
You can operate the M41d from the ATP Manager application installed
on a host PC. You will have to first download and install the ATP
Manager GUI application on your Windows PC. You will then need to
connect your PC to the M41d over an Ethernet IP connection. These
procedures are provided below.
Please note
: You will have to have completed the procedures in the
subsection above
(4.3 Gettting the M41d Up and Running)
in order to
complete the following steps.
5.1
Install the M41d ATP Manager GUI
Application
This procedure describes how to install the ATP Manager application on
your host PC.
1. Download the ATP Manager GUI application from the quantumdata
downloads page:
http://www.quantumdata.com/downloads.html
