Teledyne HydroPACT 350 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 131

Teledyne HydroPACT 350 Скачать руководство пользователя страница 51

3 – Operating software

3-14

© Teledyne Limited

DPN 402197 Issue 7.1

The vertical ranges for the 350 System are either 0m to 2, 5, 10 or 15m.

Toggle Swath Width

Dependent on survey conditions, the lateral offset scale

J

can be changed between 2m and 15m. Note

that the quality envelope will still be at ±2m.

3.3.2.2 Forward Search Window

The Forward Search Window provides a useful facility for ROV pilots. This facility helps the pilot to
steer the ROV on a track that intercepts the charted course of the target cable. It is most effective when
the heading of the ROV is approximately perpendicular to the track of the cable.

Used in this way, the 350 system will detect the target ahead of the ROV and will display an estimate of
the forward range between the coil array and the target.

NOTE

The forward range estimate relies upon information supplied by the coil array and
the altimeter. You cannot access this facility unless the system receives altitude
information from an altimeter or unless you have configured the software to use a
fixed coil height.

Figure 3-6: DeepView - Forward Search Window

«
...
49
50
51
52
53
...
»

Содержание HydroPACT 350




































































































































Отзывы:

Нет отзывов