Programming Manual
–
T3AWG3K-C Series Arbitrary Waveform Generator
True-Arb Operating Mode
86
Group
Mass memory
Syntax
MMEMory:LOAD:STATe <archive_name>,{0|1|2|3|4|<cfg_name>}
Related Commands
MEMory:STATe:LOCK,
MMEMory:STORe:STATe
Arguments
<archive_name>::=<string>.zip specifies a configuration file to be
loaded. It could be absolute or relative path.
It possible specify the configuration like:
-
0|1|2|3|4: configuration 0 refers to "MEM_0" configuration,
configuration 1 refers to "MEM_1" configuration...
-
<cfg_name>::=<string>: spcecifies the configuration name
where will be saved the loaded configuration.
Returns
None
Example
Assuming the current <msus> is "C:" and current directory
"C:\Users\awg3000\Pictures\Saved Pictures".
MM
EMORY:LOAD:STATE ”SETUP1.zip”,1 loads the configuration file
”SETUP1.zip” located in the current directory in “MEM_1”.
Table 105: MMEMory:LOAD:STATe
Command
MMEMory:MDIRectory (No Query Form)
Description
This command creates a new directory in the current path on the
mass storage system.
NOTE
: Only removable units and
"C:\Users\awg3000\Pictures\Saved Pictures" directory are
accessible by MMEMory commands.
Group
Mass Memory
Syntax
MMEMory:MDIRectory <directory_name>
Related Commands
MMEMory:CDIRectory,
MMEMory:MSIS
Arguments
<directory_name> ::= <string>
Returns
None
Example
MMEMory:MDIRectory "Waveform" creates the directory "Waveform"
in the current directory.
Table 106: MMEMory:LOAD:STATe
Command
MMEMory:MOVE (No Query Form)