Quick Install Guide
Quasar Gen IlI
CP-6302-30-R
Indoor 30x HD PTZ IP Camera
Accessing Camera Documentation and Utility Software from the Web
A. (Optional) Insert SD Card
To locally store snapshots or video recordings triggered by events, insert an SD card or a microSDXC card (up to
1TB, Class 10) with adapter (not supplied) in the SD card slot inside the camera housing (see diagram below).
Replace the camera bubble when complete.
B. Mount the Camera
Verify that the operating temperature range is between -40°C ~ 50°C
(-40° ~ 122°F), 0-90% relative humidity (non-condensing).
Be sure to have the required accessories and tools available.
Refer to the Installation Manual for mounting instructions.
NOTE:
The unit and all interconnected equipment, including
all PoE-powered network connections, must be
installed indoors within the same building. (see IEEE
802.3af standard - Environment A)
C. Connect the Camera
3-Pin Power Connector
Power
Connector
Pin
24 VAC
30 VDC
1
L (Live; white;
positive)
Pins 1 and 3
(polarity N/A)
2
Ground (Earth)
3
N (Neutral;
black; negative)
CAUTION:
This product contains a battery that is soldered to the
PCB. There is a risk of explosion if the battery is
replaced by an incorrect type.
Do not replace the battery.
The battery should be disposed of in accordance with
manufacturer’s instructions.
Terminal Connectors
14-pin Terminal
Block
Pin
Definition
Pin
Definition
1 Audio-Out
9 Alarm-In 4
2 Ground (Audio
I/O)
10 Alarm-In 3
3 Alarm-Out A1
11 Alarm-In2
4 Alarm-Out A2
12 Alarm-In 1
5 Alarm-Out B1
13 Ground
(Alarm I/O and RS-485)
6 Alarm-Out B2
14 Audio-In
7 RS-485 D+
8 RS-485 D-
