Teledyne 980 DP1.4, Руководство пользователя, Страница: 227 / 507

980 DP 1.4 Video Generator / Analyzer - User Guide Rev. A1
Page 227 June 16, 2017
Network Analyzer
– Dashboard Items

V Total - This is the measured total vertical video lines per frame.
Third Row Items:

Res[olution] - The active video resolution in horizontal pixels and vertical lines
determined from the main stream attributes.

Total (video) pixels and lines - The total video in horizontal pixels and vertical lines
determined from the main stream attributes.

Sync - The number of horizontal pixels in the blanking and it polarity (e.g. 44 pixels, positive)
and the number of vertical lines in the blanking and its polarity (e.g. 5 lines, positive).

Start - The starting pixel and line in the active video determined from the main stream
attributes.

Colorimetry and bit depth - The colorimetry and bit depth determined from the main stream
attributes.

Scan - The scan type used, progressive (e.g. Prog) or interlaced (Inter) determined from the main
stream attributes.
Fourth Row Items:

Sync -Clk - Indicates if the Link Clock and Main Video Stream clock are asynchronous or
synchronous. A value of N means async; a value of Y means synchronous. This value is determined by the
main stream attributes.

Stereo-3D - The status of 3D audio determined from the main stream attributes.

Mute - The AudioMute flag status determined from the main stream attributes.

HDCP-Sync - The HDCP sync detect of the Video Blanking VB-ID bits. Y for sync detected; No
for HDCP sync not detected.

Mvid - The Mvid value used for stream clock recovery. This is determined from the main stream
attributes.

Nvid - The Nvid value used for stream clock recovery. This is determined from the main stream
attributes.
11.3 Main Control Panel
This subsection describes the main control panel for the Network Analyzer. Refer to the table below for a
description of these controls.
Network Analyzer
–
Control Panel
Control Button Descriptions
Main Control Panel
(two views
– Active /
Inactive)
The following controls are provided in the main control panel on the right edge of
the Real Time mode interface. Each of the buttons have a pull-down menu
associated with them. The purpose of each button and their basic control functions
are described below:

Home
– The Home button
is a navigation button that when pressed
takes you back to the home screen Apps Panel.